Installation of LED Troffer
Step1: Open J-BOX
Step2: Bend hang buckle by 90° making it vertical to the rear cover of panel light.Same to 4 hang buckles.
Step3: Turn off power, and remove the ceiling panel.
Step4: For positioning,place the troffer into the T-bar. Ensure the troffer are attached to the ceiling.
Step5: Remove appropriate round knock-out(s) and connect conduit to wiring box with proper connector(s).
Step6: AC input connect to neutral in N, the line connect to L, the ground connect to the green wire.
Share:
-
Installation of LED Troffer
-
Installation of Surface Mounted LED Panel Light
-
Installation Of LED Emergency Backup For 6Inch LED Residential Downlight
-
Installation Of LED Emergency Backup For 4FT T8 LED Tube Light
-
Installation Of LED Emergency Backup For 8Inch Commercial LED Downlight
-
Installation Of LED Emergency Backup For 2X2FT LED Panel Light
-
Installation Of 6Inch Economic Commercial LED Downlight
-
Installation Video Of 6Inch Retrofit LED Downlight
-
Installation Of 8Inch Commercial LED Downlight